Vest for Warmth

I am not a warm-blooded person. I’m more a lizard in disguise and since that blue coat that I’ve been dreaming about hasn’t materialized yet, I’ve been wearing my dinosaur coat most winter. Sadly, the weather has been quite miserable and my office is also a cold, cold place. To catch two birds with stone, I decided to make a vest to wear over my clothes and under my coat.

I settled on the fur vest from Model 28 in Simplicity Naaimode 31, also known as view D of Simplicity 8218. I went through my stash and decided that I wanted neutral colours, black and gray maybe? So I pulled a number of options and started putting the pattern pieces on. In the end, I chose a thick gray fabric that had some bits cut out already and a thick black fabric that also had some parts cut out before. I think I inherited these when a friend tried to de-stash.

For the outside, I chose the black and I cut the two fronts, the back and the collar. The gray was the inside and since the collar was a folded one, only two fronts and a back were needed. Since everything is enclosed, I thought that it would even be possible to wear the gray on the outside. To achieve this, I added a little elastic loop to one edge. Then two buttons were positioned, one on the inside and one on the outside to keep the little vest closed. I think the buttons are very cute.

I have worn this thing a lot over the course of the past few months, it’s truly been a warmth saver and makes me so much more comfortable. It’s also slightly more elegant than the oversized bodywarmer that I’d been wearing before. All in all, good project!

Gray-diation Shawl

To be honest, I don’t remember much about this shawl. I finished it a couple of months ago and from what I can recall, the knitting was very boring. However, it does have good colours, gray, white and black go with everything! And I have worn it out a few times since, so lets try to recap anyway.

My Ravelry notes indicate that I started this new shawl on July 1st, 2023 and finished it on 11 October 2023. Not too bad of a turn around. The pattern is Aranea by Erika Wine and I later incorporated Asscher by Christina Danaee into it because I was so bored. The yarn was the ‘gray-diation‘ yarn dyed in December 2022. The pattern is fairly simple, the only thing to remember is to make the ‘spokes’ by effectively knitting i-cord along the edges and three other spines. In the beginning, a stitch is increased on each side of each spoke every fourth row. Once you pass 40 stitches between two spokes, you start increasing every other row.

This is a lot of knitting stockinette and for some reason, my yarn didn’t want to run out. The shawl is supposed to end when there were 80 stitches between the spokes, but I still had a lot left when I hit those 80 stitches. So at some point, I wanted something, anything else to do but knit-stitches for an eternity. I found the Asscher pattern, which has a pretty cool eyelet pattern on the back and started incorporating those instructions in between the spokes. I deviated at some point and made an extra triangle. I also needed to keep in mind that the i-cord binding still needed to happen, so I kept weighing the yarn to make sure I had enough. Once I reached the end, I followed the bind off instructions and wet blocked it.

Since I wanted the lace design to stand out a little more, I blocked it with straight edges instead of the spiderweb intention from the original pattern. This was probably not the best idea because what I liked most about the Aranea pattern was the spiderweb effect. However, I’m definitely not making this by hand ever again. I had to force myself to finish it. It has turned out a pretty decent size and it’s definitely wearable. I now also know how that gradation effect in yarn will play out when knitting. I have learnt (again) that endless stockinette is not my forte and will try to keep this in mind with future projects.

Woodwork Sheep

This year, we had an award ceremony where all of the roller derby team mates got together and presented an award made for one of the others. You basically had free reign to do whatever. We got the names of the person assigned to you very early on but I just procrastinated forever. I’d been half-looking for inspiration for all those months when I suddenly found it. A sheep themed coaster rack. Made out of wood with the coasters pretending to be the sheep’s wool. I figured, I can make this too.

So in my holiday, I set out to the local home goods store and found a placemat in the right type of colour and thickness of felt. Much easier to do that than to try to find something online. I then went on to the local hardware store and bought some sticks. Back home, I got my trusty saw, glue clamps, drill, Dremel and sanding stuff and got to work. Some of the big stick was sawn off for its body, it then got a couple of holes for its legs and I cut off a bit of its head so it would look more like a sheep. Some of the smaller sticks were cut to be the legs.

Then it was time for its coat. I made some templates and cut those out of the placemat. From the leftovers, I made ears and a tail for my lovely sheep. I put it all together and thought “I know what’s missing!”, so I made some roller skates. I found an even smaller stick, cut that into bits and glued it on while sanding a ‘wheel divot’ in and gluing on a tiny bit of placemat as the stopper. To finalize, I printed the statements that fit my person the best and put them in between the placemat circles. It was fun to try and make a thing with wood. It’s not my best crafting material, but I learn a lot every time I try it.

Proof of Concept Dyeing

“What happens if you separate out random partial sections of yarn and dye those a different colour?” Was the question that spurred the 28 March round of dyeing yarn. I wanted to try and see if it would 1) be possible to even separate out different parts without making it impossible to ball up later and 2) whether that would then create a more random pattern. I started with two skeins of Krypton 4ply yarn and started pulling out random strands and strand sections. The majority of the skein was dyed with a low percentage of black. It’s more gray in appearance because of that. The strand sections that were left out were dyed a nice dark green.

The second skein was Alpaca 4ply sock and got the same separation treatment. I wanted to dye this a bright light blue/turquoise colour with the contrast being navy. However, part of the skein that wasn’t supposed to be navy fell into the pot so there are some more blue spots than intended. I also had another skein of Alpaca 4ply sock that was dyed in some leftover yellow dye. Later, some orange and brown speckles were put over the top.

The first and second experiment also had some leftover dye in the pot, so I wanted to test out the Tweed Effect DK yarn that’s been hanging out in the cupboard too. I took a full skein and started it on the yarn winder until about half was into a ball. Cut the skein and had two tweed experiments. The ball was unwound gain and dropped dry into some blue dye. It did actually take on the barber pole effect that was indicated on the website. The green experiment was not as successful. The yarn came out very uneven and without much barber-poling.

After these experiments, I’ve been able to answer question 1. Yes, it is possible to separate out without making it impossible. It did take a bit longer than normal because certain bits didn’t want to let go of each other. I’ve not gotten around to question 2 though. I’ll report back once these yarns have reached either the knitting machine or the needles!

Cape Cover

At the end of January, we celebrated the graduation of a small class. I was still considering what type of outfit I wanted to wear. Simplicity Naaimode 53, Model 12, cape caught my eye (also known as Simplicity 9185). The idea of wearing pants with a top and the flowy cape cover became really appealing. I searched through my stash for appropriate fabrics and found a plaid for the pants (staying predictable), a white fabric for the top and some black for the cape. Since the venue was not necessarily going to be the warmest ever, so I decided to use the last bit of magic black fabric for the cover.

The pattern pieces are pretty simple. One partial front with a deeper scooped neckline, one partial back with a shallower scooped neckline and a collar piece. The pattern said to extend the front and back on one side with 90 cm. Since I had very limited fabric, I decided to not entirely comply with the instructions. The pieces were put on the cross grain to make maximum use of the remaining fabric. This did mean that I couldn’t extend them as far as the pattern originally wanted. However, I’m short, so this was actually perfect. If the cape was any longer, I think it would become a trip hazard.

After cutting, the shoulder seams were sewn, the collar attached, the side seam sewn and lastly, it was hemmed. I was afraid it was going to be all stretchy and bubbly, but it pressed out great. It was great fun to wear it, a little bit of extra swoosh, but also nice and warm. I’ve been wearing it a fair number of times even since the event, so that’s pretty good.

Cape!

In the same afternoon as the dinosaur tail, I decided that the little boy also needed a cape. Everyone needs a cape after all. However, capes for two year olds probably could be a choking hazard and we do want to keep him alive for a little while longer. So I set off on a google adventure and found a nice YouTube tutorial about a no-choke superhero cape. While superheroes are fun and all, I’m more of the witch and medieval type cape person, so I modified it.

I folded a black fleece blanket over and cut out a half circle shape. Then a smaller half circle shape for the neckline. With the cutting of this half circle, I automatically had a weird shaped piece leftover. My brain immediately went LIRIPIPE, so I used that to make a hood for the cape. I left part of the bottom seam open to attach to the cape part and sewed the rest shut to make a hood.

The idea of the no-choke thing is that the cape is attached by going under the armpits and around the back and Velcroed to the front again. I liked that idea but since I didn’t have the kid with me, I improvised with some elastic and Velcro on both sides. My theory is that elastics stretch and that if it’s too big you can add a small seam in the back of the elastic. To attach the strap to the front, I chose to make some triangle shaped bits with the other side of the Velcro on the backside. Since it’s fleece, no hemming required. I hope it fits, and otherwise I’m sure it’ll be a nice blanket.

Empire Skirt

A while ago, I found an image on Pinterest of the ‘Keursrok’ or corseted skirt from an old Dutch book called ‘Ik kan kostuumnaaien’ by Henriette J. van Wessem. I searched all over for that book and most of the time didn’t find or find quite expensive versions. I yet again ran a google search for it some day and lo and behold, there now was a digital version available! It is the 1908 version of the book and is available on Delpher. I had already found a physical copy on an auction site, put in an offer and forgot all about it, so I now also own a physical copy of the book.

Based on the mostly legible image of the keursrok in the book (page 142), I drew out the pattern as is on grid paper. The pattern indicated a waist of approximately 66 cm, which I figured was close enough to mine if I added enough seam allowance. I made a mock up of only the top part and made quite a few changes. Contrary to Edwardian bodies, my waist and underbust measurements are the same, so I had to remove a lot of the flare at the top of the skirt. I’m also short, so I had to take off some height. The side back part was really wrinkly, so I played around a lot with that and ended up with something that fit better.

In lieu of a belt loop for keys

Hook and eye at the top of the zipper

The skirt pattern was cut from some 2 euro/meter wool fabric (I don’t know, Utrecht fabric market is weird) for the outside and I wanted to interline it with some cotton and chose some dark brown as that was what I had in the stash. After basting the different layers together, I picked it up and promptly started removing all my basting again. The thing was way too heavy for comfort. I settled on adding the mock up as a lining for the top part only and attached some rigilene to it in lieu of boning. I did use some of the brown in the deep hem.

Basting

It’s practically a half circle when laid out

Lining with boning

I pinned it up on my mannequin to hang and droop as the full skirt is basically half a circle and might sink a bit on the bias. The length of the skirt was taken up and I had to remove so much. People from 120 years ago may have been a little shorter, but clearly not as short as I am. While the modern zipper wasn’t invented yet in the early 1900s, it was much easier to install one of those than the faff around with hooks and eyes in the crook of my back. So I settled for an invisible zipper, which is really quite invisible this time around.

Hem

Mock up of hem

Pockets!

I also added pear-shaped pockets to the seams between the two side panels because I don’t think skirts are wearable without pockets. Normally I also add belt loops, but since this one doesn’t have a belt or waistband, I added a little loop to the right pocket for my keys. While I started the project in October, I only finished it yesterday. There was so much procrastination happening the last couple of months. However, to celebrate the thing being finished, I wore it to work today and it held up great! The pockets work, the boning isn’t so aggressive that I can’t wear it for a full day, and I feel lovely and swooshy in it! I call it a success!

Deerstalker Witch Hat

We had a sort of vague commitment to doing some sort of Halloween in the office since it was on a workday for the first time in a while. So I decided that I was going to bring the project, which I’d been eyeing up for years, to life. You see, in 2018, Bernadette Banner posted a video about a Winter Witch Hat and then another one about a similar hat in 2020. I’ve been thinking about recreating that for literal years, but never actually got around to it. This seemed like the perfect opportunity to make myself a new hat, suitable for winter.

Since the videos above weren’t full tutorials, I scoured the internet and found some other examples of people taking on this project (ash_rock and Fresh Frippery). This last one is an actual tutorial so I took those instructions and ran with them. Since I wanted the hat to sit more ‘over’ my head than ‘on’ my head, I increased all the measurements. The original plan was to make it out of black wool, but since that fabric is quite precious, I decided to make a test version out of left-over fabric from these pants.

Two brims, one crown and two ear flaps were cut from the plaid. The brims and crown were interfaced for some stiffness and the earflaps were lined with some nice warm fleece. I put the hat together and then decided to line the inside of the crown too. I found some of the interlining from my red coat that matched well in colour and sewed it in. The ugliness is hidden with some bias tape. If I’d been fully awake throughout the project, it probably would’ve gone a lot quicker. However, I did finish it in a day and I’ve been very happy with it. I think it’s cute and I love the little fold-over point. If I make it again, I’m going to make the hole for my head a little bit bigger, but it’s not too annoying this way.

Forgotten Socks

Sometimes I take a look at my works in progress in Ravelry and decide that I have too many on. I then go to search around for projects that I either feel like completing or that need to be frogged. In this case, I frogged three and found one project that was already 80% or more completed. I’d forgotten I started them a day after completing the previous sock project in October 2021. It also uses the same self-dyed yarn but uses a different pattern. This pattern is called Hexenzirkel by Sonja Köhler and has a very cute zig zag cable pattern. The Ravelry project can be found here. I chose to do the pattern on the side of the foot.

When I recovered the project, it was in a bag with a print out of the cable chart with tick marks. Past me was more organized than current me expected, that’s for sure! I decided to complete a few more rounds of the chart and then start the 2×2 ribbing. It didn’t require much time at all to complete and I’m unsure why it ended up in a bag in the bottom of the box of shame. Hopefully I’ll get around to wearing these every so often, however, I expect a fate similar to the other ones. Nice to look at, very few wears because I’m just not used to hand knit socks.

Froggy Batwing

I bought this froggy fabric somewhere, some time ago. I don’t really remember, but I always thought they were very cute and that my mom would also find them quite funny. They are colourful and different and would be perfect for a top. When I made the Cheshire Cats batwing top, it was basically meant as a wearable mock up for this fabric. I brought it to my mom and when she tried it on, it fit fine but could probably do with a tiny bit more width. So I printed out a new copy of the  Amy Bat Wing Top, now in a size M. There were two adjustments made, one to add a bottom band and one to add a neckline band.

Everything was sewn on the serger apart from a line of stitching around the neckline to keep it in place. This is definitely the benefit of adding bands instead of hemming tops. I really like the frogs and the colours and the shape of the top. My mom also seemed to like it and I still have enough leftover to make a shirt for myself. Now I just need to get around to actually doing it…